Audio Editing Guide

Editing audio is about more than fixing volume levels and removing background noise. The art of editing audio involves taking raw, unrefined sounds and shaping them into a finished piece with a polished feel and a listenable experience. Editing is also about more than just cutting out the bad bits—it’s about refining the good ones to make them even better. An audio editor may work for television or radio, film, advertising agencies, production studios or as an independent contractor. Freelance work may involve working on commercials, TV shows or music albums. Whatever your ambitions in this field may be, there are some fundamental principles that every aspiring audio editor should understand before they start making their edits. Whether you’re recording speech or music, there are key things that you must know if you want to get the best results from your recordings so that they sound their best when you edit them later.

Gain & Volume

If you’re recording with a microphone, it’s important to get the levels right while you record. If you don’t have the levels set correctly, you’ll have to do a lot more editing to get the right volume and may also risk distortion if your levels are too high. Gain is a measure of the amount of audio signal that is being fed into an audio recording device. It’s measured in decibels (dB). When recording audio, you should make sure that the signal levels are at around -12 dBFS. 0 dBFS is the maximum level of recording where distortion or clipping can occur. -12 dBFS is a good place to aim for as it provides enough headroom so that you can make adjustments in volume in the editing stage without risking distortion. Volume is what you use to control the loudness of your audio. You can change the volume of a clip or track by using the volume fader in your audio editing software. The volume fader should be set up so that the loudest sounds are at 0 decibels (dB) and the quietest sounds are at -60 dB. If you want to make your audio louder, you can do this with the volume slider in your editing software. If you want to make your audio quieter, you can use the gain slider.

EQ

The audio spectrum is where you’ll find your EQ controls. The EQ controls are like filters that allow you to adjust the frequencies of your audio. If you have audio that’s too tinny or muted, you can use the EQ to bring out the higher frequencies so that it sounds clearer. If your audio is too bassy, you can use the EQ to bring down the low frequencies so that it sounds smoother. There are different types of EQ controls, including parametric, graphic and shelving. Some audio editing programs also include spectral analysis, which allows you to see the different parts of the audio spectrum and make adjustments accordingly.

Fade-in and fade-out

Fading in and out is a great way to improve the flow of your audio and make it sound smoother. Fading in is when you slowly increase the volume and fade-out is when you slowly decrease the volume. You can use fades to start and end your audio clips and to join them together. Fading in and out can also be used to cover up gaps in audio recordings and to reduce the volume of unwanted sounds such as people coughing or sniffling. Fading out can also be used to emphasize a key point in your audio. There are two types of fade: a cross-fade and a parallel fade. A cross-fade is when the volume of one audio clip gradually decreases while the volume of another audio clip gradually increases. A parallel fade is when the volume of one audio clip gradually decreases while the volume of the same audio clip gradually decreases.

Audio Timing

Audio timing refers to the length of time that each clip lasts in your audio project. If you have an audio clip that’s too long, you can use audio timing controls to shorten it. If you have an audio clip that’s too short, you can use audio timing controls to lengthen it. You can also use audio timing to correct mistakes, such as audio that’s out of sync or has a mistake that needs to be cut out. You can use audio markers to mark the points at which you want to make adjustments to the timing of your audio clips. Audio editing programs include tools that allow you to nudge the audio clips until they’re positioned perfectly.

Dynamic Range

The dynamic range is the difference between the loudest and quietest sounds in your audio. You can increase the dynamic range by using audio editing software to compress your audio or by using sound processing equipment. Compressing audio means that you bring the quieter sounds up to a certain volume level and bring the louder sounds down to a certain volume level. Compressing audio can make your audio sound more consistent, give it more impact and make it easier to listen to. However, it can also affect the natural flow of your audio and make it sound unnatural. There are various types of audio compressors that you can use to adjust the volume of your audio, such as equalizers and limiters. Certain audio recording devices have built-in audio compression, which you can use to adjust the volume of your audio. If you’re recording audio in a noisy environment, you can also use noise reduction to reduce the background noise and make your audio sound clearer.

Audio Quality

Audio editing also comes with a few considerations when it comes to audio quality. When recording audio, you should use a mic that is of high quality. This will ensure that your audio sounds as clear and crisp as possible. Using a low-quality microphone may result in audio that is muffled, tinny and unclear. For indoor recording, use a microphone that has an Omni-directional polar pattern. This will reduce the amount of unwanted background noise in your audio and make it easier for your listeners to hear what you’re saying. When it comes to storing your audio recordings, the type of file format you use can greatly affect the quality of your audio. You should avoid using compressed audio file formats such as MP3s, as these reduce the audio quality. Instead, you should use an uncompressed audio file format such as WAV or AIFF.

Summary

Editing audio may seem like a simple process, but it can be tricky to get right. There are many pitfalls along the way, but if you follow these basic principles, you can avoid many of them. Remember to get your levels right while you record, use the right equipment, have a good audio source and make sure your audio has the correct dynamic range to ensure your audio sounds clean, clear and easy to listen to.

You have the amazing voice, you have the perfect lyrics, and now all you need is a recording of it on your computer or mobile device. Sounds simple? Well, not exactly. The art of recording audio requires specific techniques to achieve the desired sound. But don’t worry, it’s not that difficult if we break it down step by step. In this section, we will teach you everything you need to know about audio recording and how to get started with it. Let’s dive in…

What is Audio Recording?

Audio recording is the process of capturing audio data to store or transmit. The recorded audio may be stored as a WAV, MP3 or another format file, or as a sensory impression, called a sound. A person who records audio is called an audio engineer. A person who creates the content that is recorded audio is a voice actor or artist. Some people who do both of these jobs are called audio producers. Audio recording is used in many different fields, like music, radio, theatre, film, engineering, biomedicine, and architecture, but also in fieldwork where audio recording is used to collect data in anthropological studies, sociological studies and other social sciences. Audio recording is also widely used in education and business, as well as in everyday situations where the recording of spoken information is desired or helpful.

Microphones

A microphone is an electro-mechanical device that converts sound into an electrical signal. This can then be processed and reproduced as sound through a speaker or recorded as an electrical impulse on a computer or digital device. Some of the most common uses of microphones include radio broadcasts, public speaking, musical performances, theatre, television, video conferencing, and many more. A microphone can be either a dynamic microphone or a condenser microphone. Dynamic microphones are often used for live performances and instrument recording, whereas condenser microphones are more commonly used for podcasts, studio recordings, and audiobooks. While there are many different types of microphones, the two main types of microphones used in audio recording are dynamic microphones and condenser microphones.

Types of Microphones

• Dynamic Microphones – Dynamic microphones are often used for live performances and instrument recording, whereas condenser microphones are more commonly used for podcasts, studio recordings, and audiobooks.
• Condenser Microphones – Condenser microphones are often used for live performances and instrument recording, whereas condenser microphones are more commonly used for podcasts, studio recordings, and audiobooks.
• Ribbon Microphones – Ribbon microphones are often used for live performances and instrument recording, whereas condenser microphones are more commonly used for podcasts, studio recordings, and audiobooks.
• USB Microphones – USB microphones are often used for live performances and instrument recording, whereas condenser microphones are more commonly used for podcasts, studio recordings, and audiobooks.

Decibels and Levels

Decibels and sound levels are probably the most important things you need to know before you start recording. These two factors affect the quality of your recording and play a crucial role in deciding whether you’re going to hit that golden mark. Decibels and sound levels are often confused with one another but they have absolutely no connection to each other. A decibel is a unit of measurement that is used to determine the loudness of a sound, whereas sound level is the reading of a device used to measure decibel. Decibels are measured in numbers, with 1 being the softest sound and 0 being the softest “inaudible” sound. Anything above 0 will be a loud sound. Normal human speech, for example, is decibels between 60-70, while heavy traffic is around 80-90. Now, decibels and sound levels are very important in audio recording because, as we stated above, they determine the quality of your recording. The lower the sound level, the more “crisp” and “clean” your recording is going to be. This means that your recording will have more clarity and will be less distorted.

Software for Audio Recording

When it comes to software, there are a ton of options out there, with new ones popping up all the time. You can choose between free or paid software, so you don’t have to spend a lot of money if you don’t want to. Some of the most popular options include:

• Audacity – A free, open-source software that allows you to record and edit audio on your computer. It’s available on Mac and Windows and can be downloaded on almost any device.
• GarageBand – A free app that comes pre-installed on most Apple devices, including Macs. It’s also available for Android, iOS, and Windows.
• SoundCloud – A free online audio and music recording and uploading platform. You can also use it to listen to other people’s audio recordings, share your music and audio recordings with others, and discover new music.
• Zoom – A cloud-based software that can be used for recording, conferencing, and online training. It’s available for free but with a few limitations, as well as a few paid options.

Tips to Record Voice-over at Home

• Choose the right place – When it comes to audio recording, it’s important to choose a quiet place, without any unnecessary noise that could affect your recording. It’s best to go inside your home, in a room that’s away from noise like traffic, your refrigerator, or your washing machine.
• Avoid reverberation – Reverberation occurs when sounds bounce off of surfaces and get mixed up, causing unnecessary echoes. It’s best to go inside a room with hard surfaces, like a room in your home with lots of wooden furniture and wooden flooring.
• Keep your computer free of viruses – Viruses can wreak havoc on your computer, causing it to overheat, crash, and even shut down. While there are many antivirus software out there, it’s best to use software that’s been recommended by tech experts and has a high rating.

Summary

Audio recording is an art that requires specific techniques to achieve the desired sound. Luckily, we have simplified the process by breaking down the different types of microphones, decibels, and levels as well as software for audio recording. With this information, you are now ready to start recording your voice-over.

Voice editing is a useful tool to have in any video-editing software. Voice editing allows for voice tracks to be cut and edited to fit the length of your video perfectly. However, using voice editing can be difficult for beginners. Voice editing is usually used for podcasts, Let’s Plays, or educational videos that involve an expert talking about a topic. The voice track must match the length of the video so it isn’t too long or too short. Voice editing is also useful if you have a lot of background noise in your audio track. You can also use voice editing to keep your viewers’ attention by not having long pauses between dialogue. Voice editing might seem like a complex skill to learn, but it is actually quite simple once you understand the basics and know what tools are available to you within your video-editing software of choice. In this section, we will explore some easy tips on how to use voice editing effectively in your videos going forward.

Add Silence Before and After Dialogue

A lot of people make the mistake of cutting out their voice entirely while they are editing. While it might seem like a good idea at first, it is not ideal. You need to leave silence before and after your dialogue so that it doesn’t sound like you are constantly talking. If you leave a short pause before your dialogue, it will also help your viewers’ ears adjust to your voice and make it easier to listen to you. It will also make it sound less like you are talking to your viewers directly, which might make them feel uncomfortable. A similar rule applies to the ending silence. However, you should leave a long silence after each sentence to make it easier for people to hear what you said.

Cut Out Excess Humming, Talking and Breathing

Humming and talking are two noises that are likely to appear in almost any audio track. However, humming can be a major distraction from your actual dialogue. It also often sounds like you are off-key, which can be unappealing to your viewers. Breathing can also be distracting, especially if it is loud or heavy. If you have a lot of heavy breathing in your audio track, it can sound like you are struggling to talk. This can confuse your viewers, who might think you are unwell. It can also make your video sound amateur. Excessive talking is also something you might want to cut out. If you are talking to someone else in the room, it will appear in your audio track. If it is something like a paper shuffle or a pen clicking, it can also be distracting.

Change the Volume of Key Words or Phrases

If you have a word or phrase that is particularly important in your video, you can increase the volume of that word during the voice editing process. You can also do the opposite and decrease the volume of words you don’t want to be as loud. Any volume changes should be subtle so that your viewers don’t notice any changes. However, if you have a word or phrase that needs to stand out, volume adjustments can be very useful. It can help your viewers understand the message of your video more easily if the important parts are louder.

Check for Background Noise

One of the best ways to use voice editing is to make background noise quieter. If there is a major source of noise in the audio track, you can reduce its volume to a level where it isn’t distracting. This can be helpful if there are people talking or other noises in the background of the audio track. It can also be helpful if there is a loud sound that isn’t necessarily consistent, such as a car driving by. Reducing the volume of this type of noise can make your video more enjoyable to watch, as it won’t distract your viewers.

Summary

Voice editing is a useful tool for any video editor, but it can be difficult for beginners to understand how to use it properly. Luckily, it is a very easy process once you understand the basics. If you want your voice track to be the same length as your video, then you will need to cut out any excess speaking in your audio track. You can also change the volume of keywords or phrases to help them stand out more. If there is a major source of noise in the background of your audio track, you can reduce its volume to make it quieter and less distracting. Now you know how to use voice editing effectively in your videos. Voice editing is a great way to enhance your videos and make them sound more professional.

Mixing music is the process of combining the track volume, tones, and audio elements so that your final product sounds polished and complete. Mixing audio involves adjusting the volume levels of each track as well as adding effects (like reverb or auto-tune), balancing the number of instruments in each song section, and more. A good mix can make a mediocre recording great and a great recording extraordinary. But what exactly does mixing involve? If you’re just getting started with mixing music, this section will walk you through the basics and keep you on track while you learn. Let’s get started!

What is Audio Mixing?

Audio mixing is the process of adjusting the volume levels of each track as well as adding effects so that your final product sounds polished and complete. Mixing audio involves taking all of the audio elements of your song—from vocals to guitars to sound effects—and combining them so that they work together to create a polished, cohesive sound. It’s the part of the recording process where you get to be creative with your sound design and experiment with different instruments, vocals, and effects to achieve the perfect sound for your song. Because each track has its volume level, you can easily adjust one track’s volume to make it louder or quieter without affecting the rest of the song. For example, if you want the lead guitar track to stand out more in the chorus, you can turn up the volume on that track while leaving the other tracks at the same volume level.

The importance of audio mixing

Mixing audio is an essential part of the recording process, allowing you to control each sound and create a polished, complete sound for your song. Think of it like baking a cake: you have all these ingredients (your tracks) and you have to properly combine and process them to create the final product (the finished song). Mixing audio is what helps you get your songs to sound their best. With audio mixing, you’re able to control the volume levels and adjust the audio elements of each track so that they all sound balanced and cohesive with one another. This is essential to creating a polished, professional-sounding song.

Setting up your workspace

A clean, organized and quiet workspace is essential to effective mixing. And while every studio space is different, there are a few key items that every mixing engineer has at their desk.

• Headphones – Good-quality headphones are an essential tool in any mixing engineer’s toolkit. They allow you to mix in a completely isolated and noise-free environment so that you can focus on your audio and identify any problems with your song.
• Audio Interface/Sound card – An audio interface/sound card is used to connect all of your audio elements (like microphones, guitars, keyboards, and more) to your computer. This is essential for recording multiple sources at one time and connecting them to your computer so that you can mix them together.
• Computer – You’ll need a computer so that you can edit audio files and run your audio software. You can mix with a laptop, but it’s best to have a desktop computer so that you have more space and can connect all of your audio equipment.

Learning to use your ears

There’s a lot of equipment and technology involved in audio mixing, but at the end of the day, it’s all about your ears. Your ears are the most important tools in the mixing room, so it’s important to learn how to effectively use them. Start by listening to the song in its raw form. This means turning off any effects or filters and listening to the track without any processing on the audio. This will help you identify any problems with the track and help you identify sections that need work in the mixing process. Next, use your ears to identify sections within the track. For example, you can use your ears to identify the vocal section, the guitar section, and the drum section. This will help you organize your track and make sure that each section is getting the right volume level and sound.

Identifying and correcting problems

As we mentioned above, it’s important to listen to your track in its raw form. This will help you identify any problems in the track and will help you identify sections that need work in the mixing process. It’s easy to get lost in the mixing process and start adding too many effects and filters to your audio, but for a clean, professional sound, it’s important to not over-mix. Over-mixing can hurt the quality of your song and make it sound more cluttered and messy. This can be especially problematic with vocals, guitars, and drums, as these are the three most important elements in your song.

Summary

Mixing audio is the process of combining the track volume, tones, and audio elements so that your final product sounds polished and complete. Mixing audio involves adjusting the volume levels of each track as well as adding effects (like reverb or auto-tune), balancing the number of instruments in each song section, and more. A good mix can make a mediocre recording great and a great recording extraordinary. Now that you know what audio mixing is, you can set up your workspace, learn to use your ears, and identify and correct problems with your track so that your final product sounds polished and complete.

Are you an aspiring singer or songwriter who wants to record your songs and release them for the world to hear? If so, then you’ll need to learn how to edit songs on your computer. Editing music is a process that involves removing any unwanted noise from your recording (such as a car passing by or a dog barking) to make it as clean and professional-sounding as possible. If you have recorded songs on your computer, but they aren’t quite up to par with what you want people to hear, editing software can give you the edge you need. With the help of these tips, learning how to edit songs on your computer will be much easier than you think. Read on to learn more!

Know Your Audacity Basics

• The audio track is the main feature of your song. You can add or remove vocals, instruments, and other sounds, as well as manipulate their volume and tempo.
• The track table is where you can see which parts of the song are in which audio track. This can help you to see if you have extra sounds in one part of the song and not another.
• You can use the effects panel to add reverb, echo, and other effects to your track. You can also tweak the settings to create a specific effect that fits your song.
• Finally, you can use the volume and panning sliders to change the volume of a specific track or change where it is coming from. You can also use the solo button to just hear the selected track.

Add and Remove Vocals

• When editing vocals in your song, you’ll want to make sure to remove any unwanted background noises, such as a dog barking or someone coughing in the background.
• You can do this by selecting the unwanted sound and hitting “delete” on your keyboard. You can also use the red “censor” button to cover up the noise.
• After you remove the unwanted noise, you may need to use the volume slider to make the vocals louder.
• You can also add more vocals to areas where there are moments of silence. Be sure to use the volume slider to make them louder.
• You may also want to play with the panning slider to move the volume of the vocals from left to right.

Fix Problem Areas

• You may find that there are certain parts of your song that just don’t sound quite right. This might be because you recorded it in poor conditions, you weren’t singing perfectly, or for any other reason.
• You can use the “cut” and “splice” buttons to remove the unwanted audio and replace it with silence. You can also use the “fade” button to make the two audio pieces transition smoothly so it doesn’t sound choppy.
• You can also use “duplicate” to repeat an audio track in the same spot or in multiple spots in the song. This can help to fill in silence where you have removed audio.

Final Steps

• Once you have finished editing your song, you can use the “play” button to listen to it from start to finish.
• You can also use the “export” button to save your song as a high-quality audio file for people to listen to on their computers or other devices.
• If you are releasing your song online, you may want to add it to a website like SoundCloud so that people can listen to it and download it. You can also create a YouTube video of your song so people can listen to it there.
• You may also want to create physical copies of your song, such as CDs or vinyl records, and sell them to fans.

Summary

Editing music is a process that involves removing any unwanted noise from your recording to make it as clean and professional-sounding as possible. You can do this by selecting the unwanted sound and hitting “delete” on your keyboard, removing the audio track and replacing it with silence, or fading the sound out so it fades out smoothly. You can also use the volume and panning sliders to change the volume of a specific track or change where it is coming from.

Are you an aspiring sound editor? Do you want to know what sound editing is? Do you want to know how to become a sound editor? If so, then this blog post is for you. Sound editing is one of the most important roles in the film world. A poorly edited movie leaves viewers feeling uncomfortable, jarred and confused. In other words, it’s not pleasant. Good sound editing makes the story more immersive and compelling by ensuring that everything sounds natural, clear and audible. Read on to learn more about what exactly sound editing is and why it’s so important.

What is Sound Editing?

Sound editing for movies refers to the process of cutting and manipulating existing audio to create the desired effect. This can include adding or removing dialogue, sound effects, music or any other audio to create a singular, complete soundscape. Sound editing is done during the editing phase of film production. You may be wondering why audio engineers need to be involved in the editing process. The reason for this is that audio is a continuous flow of information, much like a video clip. If a filmmaker cuts the video footage, it’s obvious to the viewer that something has changed. However, if the same happens with audio, neither the filmmaker nor the viewer is aware of it. Therefore, sound editing allows filmmakers to change the audio whenever they want without anyone realizing it.

Why is Sound Editing Important?

The quality of audio is just as significant as the quality of video. Well-executed sound editing makes a movie more immersive by making the audio sound as realistic as possible. It can also help to guide the viewer’s attention to specific aspects of the story by either increasing or decreasing the volume of certain sounds. Sound editing can also help viewers to better understand what’s happening in the movie. For example, if a character is speaking in a language that the viewer doesn’t understand, audio editing can make the speech seem clearer by boosting the volume of the voice so that it can be heard clearly.

How to Become a Sound Editor?

There are a few things that you’ll need to do in order to become a sound editor. First of all, you’ll need to attend a film school. This is because sound editing is a highly specialized field and it doesn’t make sense to learn it on the job. There are plenty of great film schools around the world. The best way to find the one that’s right for you is to do some research. Start by visiting the websites of a few different schools. You should also talk to current students as well as alumni to find out what the schools are like. You’ll also need to receive some practical training in order to become a sound editor. This can come in the form of an internship or a short-term work placement.

The Importance of Audio Mixing

Audio mixing is the process of combining multiple audio sources into a singular, coherent soundscape. This usually involves recording new audio and mixing it with existing audio. Audio mixing is a crucial step in the sound editing process. After all of the sound has been recorded, audio engineers will mix it using computers and sophisticated audio mixing boards. This ensures that all of the sound is clear, audible and well balanced. Mixing audio is an incredibly complex task and requires a lot of skill. This is why it’s important to hire a professional sound engineer to do the job.

Types of Audio Editors

All sound editors are audio engineers, but not all audio engineers are sound editors. Although they function in similar fields, their job descriptions differ slightly. The main difference between the two is that audio engineers focus on the quality of the audio, whereas sound editors focus on the quality of the audio combined with the video. While audio engineers are responsible for making sure that the audio is clear and audible, sound editors also make sure that the audio is blended with the visual aspects of the movie to make the whole piece of media seamless.

Summary

Sound editing is one of the most important aspects of filmmaking. It plays an essential role in making movies immersive and compelling by ensuring that the audio is clear and audible. If you’re interested in a career in sound editing, you’ll need to attend a film school. You’ll also need to receive some practical training in order to become a sound editor.

Splicing is cutting and joining recorded audio segments so that they appear as continuous speech. Splicing is used in radio broadcasting, audiobooks, music, podcasting and other media productions. Splicing can be done with a splicer or manually using tape methods. If you’re interested in splicing audio for any of these reasons or another project, read on for helpful tips and advice. Splicing is fast and easy when you know how to do it! Keep reading to get the inside scoop on everything you need to know about splicing audio.

What is Audio Splicing?

Audio splicing is cutting and joining recorded audio segments so that they appear as continuous speech. Splicing is used in radio broadcasting, audiobooks, music, podcasting and other media productions. Splicing can be done with a splicer or manually using tape methods. If you’re interested in splicing audio for any of these reasons or another project, read on for helpful tips and advice. Splicing is fast and easy when you know how to do it! Keep reading to get the inside scoop on everything you need to know about splicing audio.

Manual Splicing

Manual splicing is cutting and joining segments of magnetic audio tape with a splicing block. In manual splicing, you use a tape splicing block to cut the audio tape and a splicing block knife to join the audio segments. Manual splicing is the most basic way to join audio segments. Manual splicing is not recommended for professional broadcasts. Manual splicing is sometimes done for special effects. Manual splicing is sometimes done as a training exercise to teach people how to splice audio. If you want to get hands-on experience with audio splicing, manual splicing is a great way to get started. Manual splicing is inexpensive and easy to learn.

When to use Splicing

Audio splicing is best used when you want to join two or more audio segments that are on different types of media. For example, you might have a spoken-word track on an audio tape. You might also have a transcript of that same track on paper. Splicing audio is the best way to join the two media types so that you can broadcast or publish the track. You can splice audio if you have audio on a cassette, reel-to-reel, compact cassette, vinyl, or a digital file recorded on a computer or laptop. You can also splice audio if you have a transcript of the same audio.

Equipment You’ll Need for Manual Splicing

Splicing audio requires a few basic tools. These are:

• A splicing block – A splicing block is a hand-held device with grooves for holding the audio tape in place. With a splicing block, you can manually splice audio segments.
• Tape splicing block knife – A tape splicing block knife is used to cut the audio tape with a straight edge.
• Scissors – Scissors are used to trim the excess audio tape.
• Blank audio tape – Audio tape can be purchased in two- or three-hour lengths. Blank tape comes in normal and chrome.
• Normal audio tape is used for recording. – Blank computer tape – Computer tape is used to record audio. Computer tape has recording level adjustments.

Using Tape-based Splicing

Tape-based splicing is joining two audio segments with a special type of audio tape. Tape-based splicing is also known as joined-tape splicing. You can join two audio segments on different types of media by using a special tape. The special tape is called splicing tape. Splicing tape has an adhesive on one side that sticks to the other audio segments. You can do joined-tape splicing with a handheld splicing block. You can also do joined-tape splicing with a computer splicing program.

Automated Splicing Software and Tools

There are several computer programs designed for automated splicing. The most popular automated splicing programs are Pro Tools, Audacity, and Adobe Premiere. Some automated splicing programs also let you manually splice audio. If you’re using an automated splicing program, you don’t need to worry about learning how to manually splice audio. You’re probably not going to use an automated splicing program for a short track. However, if you’re putting together a longer track or an audiobook, an automated splicing program might be the better choice for you.

Summary

Ready to splice some audio? Great! Start by gathering the tools you’ll need and figuring out what type of splicing you want to do. After that, you can start splicing the audio segments. When you’re done, you’ll have beautiful, seamless audio that sounds great. Splicing audio is a useful skill to have. Whether you’re a broadcaster or an audio engineer, you’ll probably find a time when you need to splice audio. Now that you’ve read this article, you’re more than ready to start splicing audio. Ready to get started? Go grab your tools, find your audio segments, and get ready to splice!